Wakol MS330 Silane Primer is a ready-to-use 1-component MS primer for priming absorbent and non-absorbent subfloors, and to reinforce abraded resp. sanded concrete edges. DPM in only one layer and dry within 1 hour! Free of epoxy and isocyanates 1 component = no mixing, no pot life, no waste of material Ready-to-use quick drying primer Quick drying (dry in only 60 minutes) Single component silane primer One coat only DPM Strenghtens the subfloor Can be used on absorbent and non-absorbent subfloors Solvent and water free Usage per m²: approx. 80-120 g/m² as primer, approx. 250 g/m² as moisture barrier Packaging (article nr.): 10 kg (147851) PRODUCT APPLICATION Consolidates the sub floor. Binds old adhesive and plaster residues. Isolates humidity in sand cement screeds, up to 95% KRL without UFH and up to 85% KRL with UFH. After only 1 hour drying, direct installation of wooden floors can be started with a WAKOL MS Parquet Adhesive. After only 1 hour drying, self levelling can start with the appropriate WAKOL self levelling compound. Always apply the WAKOL D 3045 Special Primer to the surface before the levelling compound is poured.